# Tune topology synchronization ## Overview This guide lays out steps to tune topology synchronization for best performance on a Kubernetes deployment of StackState. To tune the topology synchronization performance, follow these steps: 1. [Observe topology synchronization performance](#observe-topology-synchronization-performance) 2. [Investigate StackState platform as the bottleneck](#investigate-stackstate-platform-as-the-bottleneck) 3. [Change the topology synchronization CPU budget](#change-the-topology-synchronization-cpu-budget) This process can be repeated until the desired performance is achieved. ## Observe topology synchronization performance To understand how a topology synchronization is performing, use the [`stac` CLI](https://archivedocs.stackstate.com/5.1/setup/cli) to take a look at the synchronization's status page. The status page shows the latency of a topology synchronization. This is the amount of time that it took from data being collected at the source, to the moment that the data is stored by the topology synchronization framework. Typically, a lower latency is preferred, however, a higher latency might be acceptable when synchronizing topology from bigger data lakes. {% tabs %} {% tab title="CLI: stac (deprecated)" %} 1. Get the urn of a synchronization using the `stac topology list` command. ```javascript # List streams stac topology list Node Id Identifier Status Created Components Deleted Components Created Relations Deleted Relations Errors --------------- --------------------------------------------------------------------------------------- -------- -------------------- -------------------- ------------------- ------------------- -------- 245676427469735 Running 0 0 0 0 0 154190823099122 urn:stackpack:stackstate-agent-v2:shared:sync:agent Running 761818 763870 1517959 1519490 0 144667609743389 urn:stackpack:stackstate:instance:44a9ce1e-413c-4c4c-819d-2095c1229dda:sync:stackstate Running 13599 5496 0 0 329 ``` 2. Get the status page for the synchronization using the `urn`. ```javascript > stac topology show urn:stackpack:stackstate:instance:44a9ce1e-413c-4c4c-819d-2095c1229dda:sync:stackstate Node Id Identifier Status Created Components Deleted Components Created Relations Deleted Relations Errors --------------- --------------------------------------------------------------------------------------- -------- -------------------- -------------------- ------------------- ------------------- -------- 144667609743389 urn:stackpack:stackstate:instance:44a9ce1e-413c-4c4c-819d-2095c1229dda:sync:stackstate Running 13599 5496 0 0 329 metric value between now and 500 seconds ago value between 500 and 1000 seconds ago value between 1000 and 1500 seconds ago ----------------- --------------------------------------- ---------------------------------------- ----------------------------------------- latency (Seconds) 35.754 38.120 31.274 ``` ⚠️ **From StackState v5.0, the old `sts` CLI is called `stac`. The old CLI is now deprecated.** The new `sts` CLI replaces the `stac` CLI. It's advised to install the new `sts` CLI and upgrade any installed instance of the old `sts` CLI to `stac`. For details see: * [Which version of the `sts` CLI am I running?](https://archivedocs.stackstate.com/5.1/setup/cli/cli-comparison#which-version-of-the-cli-am-i-running) * [Install the new `sts` CLI and upgrade the old `sts` CLI to `stac`](https://archivedocs.stackstate.com/5.1/setup/cli/cli-sts#install-the-new-sts-cli) * [Comparison between the CLIs](https://archivedocs.stackstate.com/5.1/setup/cli/cli-comparison) {% endtab %} {% tab title="CLI: sts" %} Command not currently available in the new `sts` CLI. Use the `stac` CLI. {% endtab %} {% endtabs %} ## Investigate StackState platform as the bottleneck To understand whether the StackState platform is a bottleneck when processing topology, we want to know whether the pod that does synchronization has exhausted its CPU resources. We do this using the following steps: 1. Get the configured request for the StackState topology synchroinzation pod ```javascript > kubectl get pod -l app.kubernetes.io/component=sync -o=jsonpath='{.items[*]..resources.requests.cpu}' 2 ``` 2. Get the consumed resources ``` > kubectl top pod -l app.kubernetes.io/component=sync NAME CPU(cores) MEMORY(bytes) stackstate-sync-665f988dc4-sh4fp 1970m 3234Mi ``` In the above example, we observe that 1.970 cores are used by the synchronization pod, where 2 are requested. This means that the pod is very close to its CPU budget and is likely throttled. To remedy this, follow the procedure below to change the topology synchronization CPU budget. ## Change the topology synchronization CPU budget To modify the CPU budget for the topology synchronization, add/change the following configuration items in the [values.yaml](https://archivedocs.stackstate.com/5.1/setup/install-stackstate/kubernetes_openshift/customize_config) of your Kubernetes StackState deployment and deploy the change. {% code lineNumbers="true" %} ```javascript stackstate: components: sync: resources: requests: cpu: 4 limits: cpu: 4 ``` {% endcode %} To guarantee performance, `requests` should ideally be set equal to `limits`. `Limits` can never be lower than `requests`. After making this modification, [observe the synchronization performance](#observe-topology-synchronization-performance) again to be sure that the changes have had the desired effect. If not, do another iteration to further tune the synchronization. ## See also * [Debug topology synchronization](https://archivedocs.stackstate.com/5.1/configure/topology/debug-topology-synchronization) * [Customize values.yaml](https://archivedocs.stackstate.com/5.1/setup/install-stackstate/kubernetes_openshift/customize_config)